How To Make Ceramic Tile Shine?

To prevent ceramic tile from becoming a filthy, dull surface in your house, follow our following tips on how to make it shine naturally. You may skip the waxing.

  1. Vacuum and Sweep

Cleaning your tile should begin with a sweep and a vacuum. Cleaning your floor requires two separate but complementary maintenance procedures: sweeping and vacuuming.

It is most convenient to combine cleaning with other housework. Tile flooring just need to be swept gently and then vacuumed. The brush roller in your vacuum cleaner may be used safely on tile floors without damaging the tile.

Unlike more durable materials like stone or concrete, ceramic tile is made from hardened, but still porous, clay. Loose soil may easily get embedded in the tile. harming it irreparably by scratching it.

Damage to the tile may be removed by first sweeping and then vacuuming. Doing so will get your tile ready for cleaning. The ceramic tiles need a more thorough cleaning if they are to gleam, so that is the next step.

  1. You Should First Clean

You should use a mop to thoroughly clean your tile floor. Before adding any liquid, make sure you’ve given it a quick clean to loosen any dirt. Depending on the sort of tile you have, you’ll need to clean it using a certain technique and product.

You shouldn’t put too much liquid on ceramic tile since it absorbs it so rapidly.

  • Mix a mild detergent, like dish soap, with hot water for a quick clean.
  • Mop the floor (or scrub the wall) without getting too much liquid on the tile at once.
  • Third, Mop or Spray Down Your Tile
  • Now that you have your cleaning solution, you may begin cleaning. A mop or a bottle of cleaner will do the trick.

If you need to clean a broad area, a mop is your best choice. You may also put the solution in a spray bottle and use it to clean individual spots. Once you’ve decided on the best course of action, proceed as follows:

Use a microfiber mop to distribute the solution after spraying it on your ceramic tiles. Don’t stop spraying until the whole tile floor is covered.

To clean your tile floor, use a mop to distribute the solution and a microfiber towel to polish it. You should continue doing this until the whole tile floor appears brand new.

Instead of using a sponge, see if you can find a string mop. Mops made of sponges will push the liquid about, whereas those made of string will distribute it evenly. This is an excellent method for cleaning ceramic tile without damaging the grout in the process.

Use clean, fresh water to sanitize the floor, and replace the water as often as you can.

Dry the flooring by letting them air out. Avoid using fans to hasten the drying process if at all feasible. Dirt and dust will be blown onto the wet tiles by the fan and will remain there until they dry. Your cleaning efforts will be for nothing if you do this.

Scrub the floor tiles

  1. Clean the Tile and Grout

Grout may become your worst enemy if you decide to tile your home’s floors or walls. Considering the porous nature of grout, liquids tend to be absorbed by it.

Even the greatest grout for your shower and walls may begin to appear old and dingy after prolonged exposure to water and other substances. This will also make your ceramic tile seem dirty.

Follow these measures to provide the best possible results while cleaning filling:

  • In a standard spray bottle, combine three percent hydrogen peroxide with water.
  • Then, after waiting 30 minutes, spray this solution on the grout.
  • An old toothbrush works well for cleaning grout. If the grout still seems dirty after being scrubbed with hot water, try cleaning it with a combination of vinegar and baking soda.
  • To get it really clean, you may need to repeat this process multiple times. Once you’ve cleaned the grout, maintaining it is a breeze simply spraying it with a water and vinegar solution on a regular basis.
  1. Methods for Cleaning Ceramic Tiles Naturally

Natural tile cleaners come in many forms, each with its own set of benefits and drawbacks. The best ceramic tile flooring choices are as follows:

Vinegar A solution of equal parts white vinegar and water is a potent and all-natural cleaner. Vinegar’s effectiveness as an antiseptic and Odor remover stem from its acidic nature. The acid is fantastic for cleaning ceramic tile and is effective against a wide range of residues and stains.

Due to its high acidity, this is only suitable for stronger flooring like ceramic and marble.

Use a spray bottle to apply a mixture of equal parts vinegar and water to the tile. Cleaning ceramic tile floors with vinegar: a word of caution There is some disagreement over whether or not using vinegar on tile flooring is safe.

If your tile floor is sealed, you should generally use a milder cleaner, like dish soap, to avoid damaging the sealant. Vinegar has the potential to break down the sealant over time.

Vinegar may be used safely in tiny amounts since most ceramic tile floors do not have a sealer. Vinegar is used for cleaning, not polishing. Use vinegar as a cleaner, and then rinse with hot water to restore the sheen.

The Use of Baking Soda and Vinegar

A mixture of vinegar and baking soda is significantly more effective. These two common household items, when combined, produce a chemical reaction powerful enough to cut through steel. The reaction is instantaneous, as the liquid will begin to fizz and bubble.

Mopping ceramic tile floors using a solution of equal parts vinegar, baking soda, and water is recommended. Scrub the solution into the tile, especially in high-traffic areas. Finish up by rinsing the floors with water.


When tile has become discoloured, ammonia is an excellent cleaning chemical to employ. Ammonia’s characteristics make it ideal for revitalizing old, worn tile.


Ammonia, in particular, is a powerful grease cutter. Ammonia works well for removing oil from tile floors.

  • Mix the solution and mop it onto your floor as you would with baking soda and vinegar. A ratio of 1/4 cup of ammonia to 1 gallon of water should be used for this solution.
  • Soap, Rubbing Alcohol, and Vinegar for Cleaning
  • Dish soap is gentle enough to use on ceramic floors that have been sealed, and it won’t strip the finish. Vinegar and rubbing alcohol may be added for extra punch.
  • Combine a quarter cup of vinegar, a quarter cup of rubbing alcohol, and a teaspoon of dish soap in a gallon of water. Combine, then apply to flooring through mopping or spraying.
  • Scrubbing too vigorously with this solution may result in excessive sudsing due to the dish soap. There’s no need to panic; all that’s needed is a quick rinse or two.

Ammonia, Borax, and Vinegar

This mixture has the advantages of both vinegar and ammonia. You may expect to restore the sheen to your tile floors while also removing stubborn deposits.

Borax not only acts as a potent disinfectant, but also helps bind the vinegar and ammonia into a more effective whole for cleaning.

Use 1/8 cup of borax for each gallon of water, along with 1/4 cup each of vinegar and ammonia. Spread the solution using a mop and scrub as needed. Finish up by rinsing the floors with water.

Suggestions for Maintaining Tile Floors

Here are some more factors to think about while trying to maintain the luster of your tile.

  • Avoid Polishing and Buffing Tile Floors
  • Never Clean with an Acidic Solution
  • Stay away from steel wool and bristly brushes.
  • Beyond that, frequent cleaning is one of the greatest methods to preserve the luster of tile. The longer your tile lasts, the more often you should clean and vacuum it.
  • A light cleaning of your tile many times a week is ideal, but once a week will do.

You should also try to schedule a monthly thorough cleaning of your tile. Don’t let this go for more than a few months at a time, even if you’re really busy.


Ceramic tile flooring requires regular maintenance, including the dread task of cleaning. Depending on its location and the amount of dirt built up on it, tile on your countertop, wall, or floor might be ruined if you don’t clean it frequently.

With any luck, you’ll be able to learn how to polish ceramic tile with the aid of this manual.

Keep in mind that you need to clean more than just your tile on a regular basis, and that doing so is essential. You should also clean the grout. Best of luck, and have fun tidying up!

Leave a Comment

Your email address will not be published. Required fields are marked *