Difference Between Sump Pumps and Ejector Pumps And What Are Their Uses?

Installing a sump pump or an ejector pump in your house is the most effective way to protect your property against flooding caused by severe rains or a backup in your sewage system, provided that your home has a basement. Although many people think these pumps serve the same purpose, this is not the case.
These pumps are meant to reduce damage caused by water or sewage backup and are often installed in basements.

They are comparable at first look, and in fact, they do have specific characteristics in common. Nevertheless, significant distinctions between the two pumps allow them to be used in various contexts and settings. We will discuss the critical differences between ejector pumps and sump pumps and then assist you in selecting the model most suited for your house.

  • Pro Series Pumps S3033 Sump Pump
  • Zoeller 53-0001 ⅓ HP Sump Pump
  • System for Battery Backup by Ion Technologies Model 55ACi+
  • Ejector Pump by Ion Technologies, Model SHV75i

What’s the Difference Between an Ejector and a Sump Pump?

It is crucial to understand the difference between a sump pump and an ejector pump to protect your basement from water or sewage harm. Both types of pumps are used to remove water from a sump. Even though both pumps look to be highly similar and use very similar technology, they are used for totally distinct purposes.Comparison Of Sump Pumps and Ejector Pumps for Their Intended Use and Other Features

Sump pumps, which are meant to minimize water collection caused by heavy rains and are often located in crawl spaces or basements, may be found in both locations.

On the other hand, ejector pumps are the devices accountable for transferring wastewater from sinks and toilets in the basement upward to the main sewage line.

What Is a Sump Pump?

To prevent flooding in a house, sump pumps are installed to evacuate water from the lowest area on the property. It is helpful for homes built below the water table and potentially have their basements or crawl spaces flooded by severe rain or snow.

The removal of water from the house by a sump pump helps reduce the risk of water damage and mould growth.

What is the Operation of a Sump Pump?

Homes at a greater risk of flooding may need the installation of sump pumps. When water seeps into the crawl space or basement via the foundation, it travels to the lowest part of the house, where the sump basin is located, and gathers there.

The presence of standing water may be determined by using a float sensor, the same kind of sensor found in toilet tanks. The float initiates the pump mechanism of the sump pump when the water level reaches a specific group, which ultimately causes the water to be pushed out of the basin.

Either the water is pushed via a drain pipe that empties it outside the house and away from the foundation, or it may be linked to a storm sewer.

In either method, the water is directed away from the foundation.
Homes at risk of flooding need sump pumps because they prevent water damage and mould development.
WARNING: If this pump stops working or does not operate correctly, water may enter your home. Electricity is necessary for the operation of sump pumps.

Some sump pumps have a backup battery or generator if the power goes out, which may happen during severe storms. Thanks to this precaution, even if the power goes out, the extra water will still be removed from the basement by the sump pump.

What is meant by the term “Ejector Pump”?

It is often referred to by its alternative name, “sewage ejector pump,” an ejector pump is a special kind of pump used to push sewage and grey water upward from a lower level or basement into the city’s primary sewer system.

On the other hand, an ejector pump is designed to deal with sewage and different kinds of wastewater, as opposed to a sump pump, which is meant to remove excess water from a specific area.


What is the Operation of an Ejector Pump?

The wastewater is pumped from a basin or pits up via a discharge pipe and into the main sewage line so that the system can function correctly. The pump is installed in a pit similar to those that house sump pumps, but this pit has a cover that cannot be opened and a vent pipe connected to the main sewage line.

When wastewater from the toilets, sinks, and floor drains reaches the pit, the float switch triggers the pump to begin its cycle.

Before sending the wastewater down the discharge conduit to the primary sewage system, the pump will grind and macerate any particles it encounters. In addition to that, the ejector pump will be equipped with a vent pipe that will release the sewage gasses into the air outdoors.Comparison Of Sump Pumps and Ejector Pumps for Their Intended Use and Other Features
Without an ejector pump, sewage would be unable to move uphill, which would cause blockages and may pose a threat to public health. They play an essential role in ensuring that garbage is disposed of appropriately and that plumbing systems operate efficiently.

Which Kind of Pump Do I Need, an Ejector Pump or a Sump Pump?

Your needs will dictate whether you need a sump pump or an ejector pump, so think carefully about what you want the device to do before purchasing. When trying to decide between a sump pump and an ejector pump, it is essential to take into account the following factors:
Think about the purposes you wish to serve in your basement.

You will require an ejector pump to remove wastewater from a washroom or bathroom located in the basement. Even if you simply utilize the basement for storage or as a living area, you should still have a sump pump installed.

Water vs Waste: An ejector pump is designed to remove waste, whereas a sump pump is used to remove water. The most effective remedy for issues with water accumulation is a sump pump.

You will want an ejector pump if you have a toilet or kitchen in the basement that generates sewage.
Plumbing: The plumbing in your basement will also play a role in determining which pump is necessary. If your basement has a sink or a floor drain, you may need to install an ejector pump. A sump pump is required if only a sump pit is in your basement.
In conclusion, the most effective course of action is to discuss your needs with an experienced plumber so that you may choose the pump that best meets them.

Some Suggestions Regarding Appropriate Upkeep and Problem-Solving

To prevent a malfunction, sump pumps need regular maintenance, which involves cleaning the pump and the sump basin. On the other hand, ejector pumps do not need to have their parts repaired regularly. However, to prevent the pump from failing, inspecting the float periodically and removing any accumulated toilet paper or debris is essential.

To protect one’s health from the dangers posed by sewage gas, it is necessary to immediately replace any lid that has been damaged. Failure of an ejector pump may be caused by various factors, the most frequent of which are broken covers and debris trapped in the float.
An easy method to evaluate the functionality of the sump pump in your basement — Do a pour test…
Your ejector or sump pump may have been collecting dust in your basement’s sump pit for several months. The fall and winter seasons deliver intense precipitation and snow that quickly melts.

Even if your sump pump may have operated without a hitch during the previous season, there is NO assurance that it will do so during the season in which you will need its use the most.

A sump pump that is not being used is analogous to a vehicle battery that has been sitting for many months without being started.


Any house with a sump basin is at risk of experiencing water damage, particularly basement flooding in our region, as well as if the electricity goes out or the pump breaks down.
Perform a pour test regularly to ensure that your pump activates and deactivates at the appropriate times.
Fill a bucket with five gallons of water and carefully pour it over the sump pump basin. The pump should operate automatically when the water level reaches the target level. If the pump does not start, there may be anything blocking the motor or a problem with the connection.


The sump pump and the ejector pump are located in the basement; however, the sump pump removes undesired water from the outside, while the ejector pump removes wastewater from the sewage system.

Even though they are not the most eye-catching components of a house, knowing their roles and how they vary may save a homeowner a significant amount of mental anguish.
Both of these pumps are essential to the smooth operation of your home in their ways. The sump pump and the ejector pump are rather complicated, so any maintenance that must be done on them, such as replacing either one, must be done by a trained professional.

In any case, it would be beneficial for the homeowner to understand the distinctions between the pumps if a problem arises. Don’t stress out over finding a solution to the situation. Because of this, getting a qualified plumber to install, repair, and replace these pumps is strongly recommended.

Leave a Comment

Your email address will not be published. Required fields are marked *