Your air conditioning system is a complex collection of different components that work in unison together to cool your air.  Understanding how all of these components function and work together can save you thousands of dollars in service calls.  By knowing which component could be at fault in a problem situation you can save yourself the expensive call to the air conditioning repair service.

Steps To Take Before Calling An Air Conditioning Repair Service

The first thing you want to check before calling an air conditioning repair service is to make sure that the air conditioner is set up properly and receiving power.  Sometimes knobs and dials will get bumped and settings will change that can cause your air conditioner to not function properly.

I would always start with the power as an air conditioner can sometimes be on a separate breaker that may have been tripped.  Check the outlet first, if this is out then check the breaker.  Nine times out of ten when a system goes down completely this is the cause.

The next thing that can cause a system to have problems is its being dirty.  Check the fans and ducts to see if they are clogged.  Make sure that all the fans are spinning and operating properly before calling an air conditioning repair service.  You should check this from time to time anyway to keep up the health of your system.

These fans will get clogged with dirt and stop operating from time to time, but if you keep the clean and running smooth you should have very little problems with your system.  In some cases they may fail completely and need to be replaced, but for the most part this is a simple process.

In addition to the fans, check the filters before calling an air conditioning repair service.  These will get clogged over time because that is their job.  You need to check these on a regular basis and make sure that they are free and clear so that air can flow freely.

I would not try to clean one off but simply replace it,  at most hardware stores you can find them for ten to twelve dollars.

If all these things check out you may have to call an air conditioning repair service.  Air conditioning system repair is sometimes unavoidable so when it does happen, make sure you have someone reliable in mind to call.  Also, always remember to take the proper steps to keep your system up and running.

Before you start on your air conditioning repair training in earnest you need to understand the basics of how an air conditioner works.  Any air conditioning repair service is going to require that you have these basic skills and knowledge before they hire.

Regardless of whether or not you are looking to get air conditioning repair training or not, this information can be very useful if you are looking to learn more about how air conditioners work.

Air Conditioning Repair Training – Understanding How An Air Conditioner Works

Generally speaking there are three main components of an air conditioning system.  In order to begin your air conditioning repair training you need to know exactly how each of these systems works and what are some early symptoms of failure in these components.

The first component is the compressor.  Inside an air condition system is a collection of hoses and things that look sort of like radiators.  Throughout these pipes and tubes flows Freon in both a gas and liquid state.  The compressor is what powers and pushes the flow of all this Freon.

By changing the size of the tubes the system forces the Freon to change from a gas to a liquid and back again.  By doing this energy is expelled and absorbed, and when time properly can cool off air that is passed over the two other components.  Generally speaking Freon needs to be added from time to time and the compressor pump needs to be checked to make sure that it is functioning properly.

The next component is the evaporator core.  This is generally right after the Freon has been cooled.  This component looks like a miniature radiator and usually has a fan attached onto it.  The coils of the evaporator core should be cold to the touch and may collect some frost.  Air is blown over the coils, cooled, and then sent to the rest of the house or car.

This can be a problem spot if the fan stops working or if the coils build up too much frost.  Usually you want to make sure that everything in this section is free and clear.

The last component is the condenser.  This part is where hot air from inside is cooled before it is sent back over the evaporator to be cooled.  This system is important to pre cool the air and make sure that cold air is getting cooled at the evaporator.

This ensures and even cooling of the air.  This system can be plagued by the same problems as the evaporator core, although frost build up is not one of the problems typically associated with it.  Usually if there is a break down in this system in will not be noticed right away but can cause sever problems down the line.

There you have some basics to start your air conditioning repair training.